High-end cables FLUID® series

The excellence of FLUID^_® cables

Our high-end cables from the FLUID^_® series are manufactured specifically to best adapt to the generous terminal blocks of our loudspeakers, thus allowing you to extract the best from your high-fidelity installation.

Our FLUID^_® cables are carefully made according to processes from the aeronautical field.

FLUID^_® is a Registered design.

Composition

The cables of the FLUID^_® M3 series are made of pure silver-plated copper conductors, with a cross section of AWG 11 (4 mm²) each, with PTFE insulation (polytetrafluorethylene), ensuring excellent resistance over time.

Both light and flexible, they fit perfectly into your installation while retaining the shapes you wish to give them.

The terminations connecting the speakers are large connectors gilded with fine gold, specifically developed by TAP electro-acoustique for the cables of the FLUID^_® series.

These extremities have large double-sided exchange surfaces, and their flat profile prevents any untimely loosening.

FLUID^_® series cables are a worthy complement to our speakers, while minimizing the space required at the back of the cabinets.

---

FLUID^_® M3

FLUID® M3 cables are individual, intended for mono-wiring use.

• NOTE: for use in bi-wiring or bi-amplification, FLUID^_® 2M3 cables are available.

Sold in pairs, each cable has 2 wires.

Length of each cable ≈ 9.84 feet (3 meters).
The wires are protected by braided sheaths of different colors.
Finishes may vary slightly depending on available materials.

Simple finish with braided main sheath in cotton, color black.

Finished with 4mm golden banana plugs.
Braided main sheath in cotton, ecru color.

---

Prices and finishes of FLUID^_® M3

Prices on January 1, 2025
(the pair of cables):

Optionals:

Additional length	+ € 100/meter (3.28 feet) per cable
Magnetic shielding *	+ € 150/meter (3.28 feet) per cable

* The magnetic shielding of the cable is ensured by a braided sheath in Pure Silver Copper, wrapping the main strand, placed below the finishing sheath.

The shielding connections are made using pure Silver-plated Copper wire, with a section of AWG 16 (1.3 mm²) each, with PTFE (polytetrafluorethylene) insulation, coming out at each end of the cable.

These shielding wires are to be connected to the Ground terminals (or Earth) of the equipment.

PLEASE NOTE: in order to maintain perfect transcription quality, we recommend limiting the length of the speaker cables to ≈ 20 feet each, for a section of AWG 11.
(≈ 6 meters for a section of 4 mm²)

---

FLUID^_® 2M3

FLUID^_® 2M3 cables are double, made up of harnesses, and intended for use in bi-wiring or bi-amplification.

They are manufactured using the same processes as FLUID^_® M3 cables.

Sold in pairs, these harnesses each consist of 2 cables with 2 wires.
The main strand is twisted during the sheathing to ensure good flexibility of the whole.

On the amplifier side, the pairs are separated 1.64 ft (50 cm) from the main harness, so that the different equipment can be easily connected.

Length of each harness ≈ 9.84 feet (3 meters).
The wires are protected by braided sheaths of different colors.
Finishes may vary slightly depending on available materials.

Below, the finish is made using braided sheaths, cotton.

---

Prices and finishes of FLUID^_® 2M3

Prices as of January 1, 2025
(the pair of harnesses):

Optionals:

Additional length	+ € 150/meter (3.28 ft) per harness
Magnetic shielding *	+ € 200/meter (3.28 ft) per harness

* The magnetic shielding of the harness is ensured by a braided sheath in Pure Silver Copper, wrapping the main strand, placed below the finishing sheath.

The shielding connections are made using pure Silver-plated Copper wire, with a section of AWG 16 (1.3 mm²) each, with PTFE (polytetrafluorethylene) insulation, coming out at each end of the harness.

These shielding wires are to be connected to the Ground terminals (or Earth) of the equipment.

PLEASE NOTE: in order to maintain perfect transcription quality, we recommend limiting the length of the speaker cables to ≈ 20 feet each, for a section of AWG 11.
(≈ 6 meters for a section of 4 mm²)

---

Custom FLUID^_® cables

Lengths and finishes to be defined. Manufactured with care according to your needs and designed to best suit your installation.

These cables are manufactured on special order.
Please consult us.

• These items fall under the category of personalized products.

---

Back to CABLES.

---

Also discover our high-end SPEAKERS.

---

The applicable warranty to our speaker cables, as described in their initial article sheet, is that corresponding to a standard product of our Terms of Sale.

Any request for customization will lead to transforming these items into a personalized product. Colors or finishes other than those initially proposed by TAP electro-acoustique fall within this definition criterion.

We invite you to read all of our Terms of Sale.

---

TAP electro-acoustique continually pursues a policy of improvement and development of its products, certain criteria of which are subject to change without notice.